Monel K500 Fasteners : Manufacturer, Stockist & Supplier : Kinnari Steel

The Monel K500 Fasteners are manufactured to sustain very high pressure and product warranty. Monel K500 Fasteners have special quality finishing and duress for long life, high pressure and zero defects. Kinnari Steel are Monel K500 Fasteners Manufacturer, Monel K500 Fasteners Stockiest & Monel K500 Fasteners Supplier.

Contact Us For Your Requirement of Monel K500 Fastener

Monel K500 Fasteners

Kinnari Steel is a very popular Indian manufacturer and supplier of high nickel based alloys. Specialty pipes like Monel are what make us stand out from the crowd. We are the only company in the country with 65+ tons of Monel Pipes in 2015. We have pipes in ready stock from ½” to 6” in various thicknesses.
At Kinnari Steel, we try each year to try and include various sizes in stock. This way we can service even the nonstandard sizes for immediate dispatch. One of the main reasons our brand resonates around the world is the kind of delivery we provide to our customers. It is simply unmatched. We have so many sizes in stock if it is not with us; it is unlikely you will find it in stock anywhere. The KSC buying experience is what makes our client come back to us each time they purchase our goods.

Specification

Material Notes:

A precipitation-hardenable nickel-copper alloy that combines the corrosion resistance of MONEL alloy 400 with greater strength and hardness. It also has low permeability and is nonmagnetic to under -150°F (-101°C). Used for pump shafts, oil-well tools and instruments, doctor blades and scrapers, springs, valve trim, fasteners, and marine propeller shafts. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip, and wire.

Data provided by the manufacturer, Special Metals.

Monel is a group of nickel alloys, primarily composed of nickel (up to 67%) and copper, with small amounts of iron, manganese, carbon, and silicon. Stronger than pure nickel, Monel alloys are resistant to corrosion by many agents, including rapidly flowing seawater. They can be fabricated readily by hot- and cold-working, machining, and welding.

Monel was created by David H. Browne, chief metallurgist for International Nickel Co. Monel alloy 400 is the binary alloy of the same proportions of nickel and copper as is found naturally in the nickel ore from the Sudbury (Ontario) mines and is therefore considered apuritan alloy. Monel was named after company president Ambrose Monell, and patented in 1906. One L was dropped because family names were not allowed as trademarks at that time.The name is now a trademark of Special Metals Corporation.

It is a very expensive alloy, with the cost ranging from 5 to 10 times the cost of copper and nickel, hence its use is limited to those applications where it cannot be replaced with cheaper alternatives. Compared to carbon steel, piping in monel is more than 3 times as expensive.

BACKGROUND

Monel K-500 combines the excellent corrosion resistance characteristic of Monel alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminium and titanium to the nickel-copper base, and by heating under controlled conditions so that sub microscopic particles of Ni3 (Ti, Al) are precipitated throughout the matrix. The corrosion resistance of Monel alloy K-500 is substantially equivalent to that of alloy 400 except that, when in the age-hardened condition, alloy K-500 has a greater tendency toward stress-corrosion cracking in some environments. Monel alloy K-500 has been found to be resistant to a sour gas environment. The combination of very low corrosion rates in high-velocity sea water and high strength make alloy K-500 particularly suitable for shafts of centrifugal pumps in marine service. In stagnant or slow-moving sea water, fouling may occur followed by pitting, but this pitting slows down after a fairly rapid initial attack.

Typical applications for alloy K-500 are: pump shafts and impellers, doctor blades and scrapers, oil-well drill collars and instruments and electronic components.

ABOUT KSC

Kinnari Steel is manufacturers, stockiest & suppliers of Monel K500 Fasteners. Monel K500 Fasteners has special quality finishing and duress for long life, high pressure and zero defects.

The product differentiation is based on the premier finish of Monel K500 Fasteners with the minimum burr on the threads. Kinnari Steel is a trusted supplier and associated in partnership with premium manufacturers in India for the international distribution of precision high-quality Monel K500 Fasteners to Oil & Gas industry. The Monel K500 Fasteners have a great connectivity to pipes and have a long life in the refining industry for low to high-pressure applications.

Orders at Kinnari Steel are guaranteed fast delivery of the Monel K500 Fasteners in the country. The main reason being we have an excellent warehousing and storage facilities for both finished and semi-finished goods.They are made ready as per the urgent requirements of the customers. The Monel K500 Fasteners are manufactured to sustain very high pressure and product warranty.

A lot of emphases is placed on the packing and packaging. The Monel K500 Fasteners are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. Caps are made available to the ends on request of the buyer.

All Monel K500 Fasteners are offered with an NACE 3.1 Certification, Mill Test Certification and ISO 17025 Standards by a Government of India approved Laboratory. Positive Material Identification is done on all raw material procured at Kinnari Steel.

Kinnari Steel have exported to over 45 countries including UAE, UK, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, brazil, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angola & Sri Lanka.

The Monel K500 Fasteners are used in Petro-Chemical Industry, Oil and Gas Industry, Nuclear Industry, Pulp & Paper Industry, Research &Development, Mega Projects &Defence& Development Industries. In fact wing to the special grade of steel, Monel K500 Fasteners are used for all critical applications.

APPLICATIONS

• Making of standard length measurements and measuring devices
• Cryogenic and laser components
• Bi-metal strip, thermostats
• Tanks and pipes that transport liquefied gases
• Aerospace composites
• Pendulum and precision components.

Problems that customers face when they buy from other companies

• Non availability
• Late deliveries
• Poor packaging/ Unprofessional Packing
• Poor surface finish
• No Mill test report
• No control on quality and testing
• High rejection rate
• Poor after sales service
• Supply of wrong grades

Benefits that our company offers:

• World class buying experience
• Very quick delivery
• Mill test report/ Digital Mill test report in accordance with EN10204 NACE 3.1, NACE 3.2
• 3rd Party inspection
• High pressure sustainability
• Impeccable surface finish
• Product replacement warranty
• After sales support and service
• High quality packaging/ Premium Packaging and Packing for sea and Air transport
• Government and Private Laboratory Testing
• Test certificate from ISO 17025 Standards Laboratory
• Same day shipping of the goods

Our Products