Al6xn Butt Weld Fittings
Al6xn Butt Weld Fittings : Manufacturer, Stockiest & Supplier
Contact Us For Your Requirement of Al6xn Butt Weld Fittings
Al6xn Butt Weld Fittings
We are highly known for offering best in class services and are extremely preferred in the industry. We provide products with absolute precision that are rigorously tested on various parameters. Our expert teams offer excellent after-sales services and make sure that orders are shipped on the same day. We offer fastest delivery service and unique consultancy service that have helped us gained numerous clients. We have gained the trust of our esteemed clients and they are extremely happy with us.
WHAT IS AL6XN?
AL-6XN is an alloy made of nickel, chromium and molybdenum. The percentage of composition of these 3 elements in the alloy is as follows, Nickel 24%, Chromium 22% and Molybdenum 6.3%, with traces of other elements such as Nitrogen. AL6XN is a super austenitic stainless steel with low carbon and high purity. The UNS designation for this alloy is N08367.
AL-6XN shows a good resistance to chloride stress-corrosion cracking due to the high nickel and molybdenum contents. Because of the molybdenum content, it is also resistant to chloride pitting. The nitrogen content serves to further increase pitting resistance and also gives it higher strength than typical 300 series austenitic stainless steels, and thereby often allows it to be used in thinner sections. And the nitrogen content of AL6XN gives it a greater tensile strength than common austenitic stainless steels, while retaining high ductility and impact strength.
INTRODUCTION ABOUT AL6XN BUTT WELD FITTINGS
AL6XN Butt Weld Fitting are a range of highly demanded products that perform exceptionally well in extreme environments because of their excellent corrosion resistance properties. Theyshows exceptional resistance to corrosion in high chloride environments as well as many acids. They provide outstanding leak-proof and highly strong connections. They offer excellent resistance to pitting and crevice corrosion in chloride solutions, offer high strength and provide extraordinary toughness.
The products that come under this list are:
- 90 degree elbows
- 45 degree elbows
- 180 degree return bends
- Standard tees
- Reducing tees
- Caps
- Concentric reducers
- Eccentric reducers
- Stub ends (types a, b, & c)
- Flanges
- Crosses (straight & reducing)
- Angle rings
- Laterals
- Threaded adapters
AL6XN Butt Weld Fittings are used in a wide range of industries. They are utilized in applications such as food processing, pharmaceutical industry, biopharmaceutical processes,chemical industry, cosmetic industry, brewery, desalination plants, aerospace engineering, pulp and paper industry, and gas handling applications.
Contact us for a quick quote:
The Featured Products of Al6xn Butt weld Fittings are:
PROPERTIES OF AL6XN BUTT WELD FITTINGS
CHEMICAL PROPERTIES OF AL6XN BUTT WELD FITTINGS
| Element | Typical | Allowable |
| Carbon | 0.02 | 0.03 maximum |
| Manganese | 0.40 | 2.00 maximum |
| Phosphorus | 0.020 | 0.040 maximum |
| Sulfer | 0.001 | 0.030 maximum |
| Silicon | 0.40 | 1.00 maximum |
| Chromium | 20.5 | 20.00 / 22.00 |
| Nickel | 24.00 | 23.50 / 25.50 |
| Molybdenum | 6.20 | 6.00 / 7.00 |
| Nitrogen | 0.22 | 0.18 / 0.25 |
| Copper | 0.2 | 0.75 |
| Iron | Balance | Balance |
PHYSICAL PROPERTIES OF AL6XN BUTT WELD FITTINGS
| Property | Value | Units |
| Density | 0.291 8.06 |
lb/in3 g/cm3 |
| Modulus of Elasticity | 28.3 x 106 195 |
psi Gpa |
| Melting Range | 2410 to 2550 1320 to 1400 |
°F °C |
| Thermal Conductivity 68 to 212 °F 20 to 100°C |
6.8 11.8 |
Btu/hr • ft • °F W/mK |
| Coefficient of Expansion 68 to 212 °F 20 to 100°C |
8.5 15.3 |
10-6/°F 10-6/°C |
| Specific Heat Capacity | 0.11 500 |
Btu/lb • °F J/kg • K |
| Electrical Resistivity | 535 0.89 |
Ohm • circ mil/ft µΩm |
| Magnetic Permeability Fully annealed 0.5″ plate 65% cold-worked plate |
1.0028 1.0028 |
Oersted (µ at 200H) |
| Sealing Temperature | 1885 1030 |
°F °C |
APPLICATIONS OF AL6XN BUTT WELD FITTINGS
Typical applications of Al6xn Butt Weld Fittings include:
- Oil and Gas pipeline
- Chemical industry
- Plumbing
- Water supply systems
- Pulp and paper industry
- Fabrication Industry
- Water piping systems
- Power plants
- Food processing equipment
- Heat exchangers
ABOUT KINNARI STEEL
Kinnari Steel Corporation is a leading distributor of Stainless Steel and Alloy Steel Products. We havebeen involved in manufacturing and supplying excellent quality products since 2 decades. We hold great expertise in sourcing needs of clients for nickel based Alloys. Our aim is to provide best services in the industry and over the years we have gained much prominence due to propulsion and expertise in high nickel alloys. We thus handle each of our clients’ queries with great sincerity and help them figure out their requirements. In order to maintain the highest standards of quality we make sure that each and every unit is individually inspected and tested, thereby cropping out the scope of any sort of anomaly. Great emphasis is placed on making our products in an environment friendly way and prevent any kind of harm to the nature. We are known across our clients for fast delivery of highly products and we have a very low rejection rate. We put great efforts in catering to the needs of our clients and thus we have a huge base of happy customers.Our head office is located in Mumbai and we have established subsidiary office, Arihant Tubes and Fittings in Pune. Kinnari Steel Corporation is certified by ISO 9001: 2008 for continued excellence in providing impeccable quality products to its customers.
WHAT PROBLEMS CUSTOMERS TYPICALLY FACE
- Non availability
- Late deliveries
- Poor packaging/ Unprofessional Packing
- Poor surface finish
- No Mill test report
- No control on quality and testing
- High rejection rate
- Poor after sales service
- Supply of wrong grades
- Material inconsistent with ASTM Standards
- Very hard material for use
- Dubious Practices
- Lack of knowledge
- Product fails under high pressure
- High pricing of the goods due to supplier commission
- No inspection of the goods
- Supply of used material
- Supply of rejected material
- Minus tolerance
- Weld repair of goods
BENEFITS THAT OUR COMPANY OFFERS:
- We are renowned for the World class buying experience we offer
- Our delivery services are the fastest
- We provide Digital Mill test report in accordance with EN10204 NACE 3.1, NACE 3.2
- 3rd Party inspection is carried out
- Our products offer High pressure sustainability
- Product replacement warranty is provided
- We offer Premium Packaging and Packing for sea and Air transport
- We have the Highest stock in the country
- Stringent Quality Testing and Control is followed
- Our products have ISO 9001:2008 , ISO 14001:2004, OHSAS 18001:2007 Certifications
- We have <1% rejection rate of the goods in over a decade
- We are Distributors in more than 13 countries
- Competitive pricing is offered
- We have High experience in working with Nickel Based Alloys
- Our unique Consultancy for alternate sizes and material is highly appreciated
- Heat Number Traceability is given
- We provide Customized marking as per customer requirement
Send us your requirements now!
LOOKING TO BUY AL6XN BUTT WELD FITTINGS? Contact Us