Brass Fasteners : Manufacturer, Stockiest and Supplier : Kinnari Steel

Brass Fasteners are in huge demand due to their multiple applications. Kinnari Steel are Brass Fasteners Manufacturer, Brass Fasteners Stockiest & special-metals/tantalum-products/titanium-fasteners-nut-bolt/.

Brass Fasteners

The term is also applied to a variety of brasses, and the distinction is largely historical.Modern practice in museums and archaeology increasingly avoids both terms for historical objects in favour of the all-embracing “copper alloy”.

Brass Fasteners is an alloy made of copper and zinc; the proportions of zinc and copper can be varied to create a range of Brass Fasteners with varying properties. It is a substitution alloy: atoms of the two constituents may replace each other within the same crystal structure.

Brass Fasteners types

Class	Copper (%)	Zinc (%)	Notes
Alpha brasses	>65	<35	Alpha brasses are malleable, can be worked cold, and are used in pressing, forging, or similar applications. They contain only one phase, with face-centered cubic crystal structure.
Alpha-beta brasses	55–65	35–45	Also called duplex brasses. Suited for hot working. It contains both α and β’ phase; the β’-phase is body-centered cubic and is harder and stronger than α. Alpha-beta brasses are usually worked hot.
Beta brasses[citation needed]	50–55	45–50	Can only be worked hot, and are harder, stronger, and suitable for casting.
White brass	<50	>50	Too brittle for general use. The term may also refer to certain types of nickel silver alloys as well as Cu-Zn-Sn alloys with high proportions (typically 40%+) of tin and/or zinc, as well as predominantly zinc casting alloys with copper additive.

Brass alloys

Alloy name	Copper (%)	Zinc (%)	Other	Notes
Abyssinian gold	90	10
Admiralty brass	69	30	1% tin	Contains 1% tin to inhibit dezincification in many environments.
Aich’s alloy	60.66	36.58	1.02% tin, 1.74% iron	Designed for use in marine service owing to its corrosion resistance, hardness and toughness. A characteristic application is to the protection of ships’ bottoms, but more modern methods of cathodic protection have rendered its use less common. Its appearance resembles that of gold.
Aluminum brass	77.5	20.5	2% aluminum	Aluminium improves corrosion resistance. It is used for heat exchanger and condenser tubes.
Arsenical brass			arsenic, frequently aluminum	Used for boiler fireboxes.

Alloy name	Copper (%)	Zinc (%)	Other	Notes
Cartridge brass	70	30		Good cold working properties. Used for ammunition cases.
Common brass		37		Also called rivet brass. Cheap and standard for cold working.
DZR brass			arsenic	Dezincification resistant brass with a small percentage of arsenic.
Gilding metal	95	5	arsenic	Softest type of brass commonly available. Gilding metal is typically used for ammunition bullet “jackets”, e.g., full metal jacket bullets.
High brass	65	35		Has a high tensile strength and is used for springs, screws, and rivets.
Leaded brass			lead	An alpha-beta brass with an addition of lead. It has excellent machinability.
Lead-free brass			<0.25% lead	Defined by California Assembly Bill AB 1953 contains “not more than 0.25 per cent lead content”.
Low brass	80	20		Has a light golden colour and excellent ductility; it is used for flexible metal hoses and metal bellows.
Manganese brass	70	29	1.3% manganese	Most notably used in making golden dollar coins in the United States.
Muntz metal	60	40	traces of iron	Used as a lining on boats.
Naval brass	59	40	1% tin	Similar to admiralty brass.
Nickel brass	70	24.5	5.5% nickel	Used to make pound coins in the pound sterling currency. Also the main constituent of the bi-metallic One Euro coin and the centre part of the Two Euro coin.
Nordic gold	89	5	5% aluminium, 1% tin	Used in 10, 20, and 50 cents euro coins.
Prince’s metal	75	25		A type of alpha brass. Due to its yellow colour, it is used as an imitation of gold.[31] Also calledPrince Rupert’s metal, the alloy was named after Prince Rupert of the Rhine.
Red brass, Rose brass	85	5	5% tin, 5% lead	Both an American term for the copper-zinc-tin alloy known as gunmetal, and an alloy which is considered both a brass and a bronze.[32][33] Red brass is also an alternative name for copper alloy C23000, which is composed of 14–16% zinc, 0.05% iron and lead, and the remainder copper.[34] It may also refer to ounce metal, another copper-zinc-tin alloy.
Rich low brass, Tombac		5–20		Often used in jewellery applications.
Silicon tombac	80	16	4% silicon	Used as an alternative for investment casted steel parts.
Tonval brass			lead	Also called CW617N or CZ122 or OT58. It is not recommended for seawater use, being susceptible to dezincification.
Yellow brass	67	33		An American term for 33% zinc brass.

Problems that customers face when they buy from other companies

Non availability
Late deliveries
Poor packaging/ Unprofessional Packing
Poor surface finish
No Mill test report
No control on quality and testing
High rejection rate
Poor after sales service
Supply of wrong grades

Benefits that our company offers:

World class buying experience
Very quick delivery
Mill test report/ Digital Mill test report in accordance with EN10204 NACE 3.1, NACE 3.2
3rd Party inspection
High pressure sustainability
Impeccable surface finish
Product replacement warranty
High quality packaging/ Premium Packaging and Packing for sea and Air transport
Government and Private Laboratory Testing
Test certificate from ISO 17025 Standards Laboratory
Same day shipping of the goods
Highest stock in the country
Stringent Quality Testing and Control
ISO 9001:2008 , ISO 14001:2004, OHSAS 18001:2007 Certifications.

Our Products

Brass Fastener : Manufacturer, Stockiest and Supplier : Kinnari Steel

KSC is stockiest & supplier of Brass Fastener. Huge stock of standard Brass Fastener is in ready stock. Send your enquires on kslok@vsnl.net

Brand: KSC

Manufacturer: Kinnari Steel

Model: Fastener

Product ID: B-FA